Applications / Resin / Automotive & Engineering
Automotive and Engineering Plastics for Under-Hood and Interior Parts
Reinforced nylon, PC and PC/ABS, impact PP and POE for automotive and electrical parts.
Automotive parts are specified by impact, heat and dimension, and OEMs audit every change. BASTONE supplies reinforced PA66 made in Hangzhou, PC and PC/ABS, impact PP and POE.
Common Problems in Automotive & Engineering
What buyers ask us about, and the grades that solve it.
Heat and load near the engine
Unreinforced plastics creep under heat. PA66 GF25 gives 145 MPa tensile strength and a 249 °C heat distortion temperature.
Recommended grades
Toughness and flow on large parts
EP531N flows at 20 to 25 g/10 min with Charpy impact above 40 kJ/m² for exterior and interior components.
Recommended grades
Impact modifier for PP compounds
WANSUPER 65015 POE raises impact in TPO and PP compounds.
Recommended grades
Housings that must keep shape and finish
PC and PC/ABS cover interior parts and housings.
Recommended grades
Automotive Plastic Resin Grades We Supply
Grouped by the part of the application they serve. Select a grade for the datasheet and quotation.
Reinforced PA66 for structural parts
25 percent glass fibre for load at temperature.
Modified PA66 GF25
25 percent glass-fiber reinforced PA66 compound in black pellets, with 145 MPa tensile strength and 249 °C heat distortion temperature, for injection-molded structural parts in automotive, electrical and industrial equipment.
View grade →PC and PC/ABS
Housings and interior parts.
Polycarbonate (PC)
Virgin and modified polycarbonate granules, mainly transparent grades, in 25 kg or 750 kg bags.
View grade →Impact copolymer PP and POE
Toughness for exterior and interior parts and compounds.
Lanzhou PP EP531N
High-flow impact copolymer PP with a melt flow rate of 20 to 25 g/10 min and Charpy impact strength above 40 kJ/m² for automotive exterior and interior components.
View grade →PP K9928H
High-flow impact copolymer PP (28.8 g/10 min) for thick-wall parts that need dimensional stability, low warpage and low-temperature impact, such as washing machine inner drums and appliance housings.
View grade →WANSUPER® 65015 POE (Polyolefin Elastomer)
Metallocene ethylene-butene POE with a density of 0.862 g/cm³ and a melt index of 1.2 g/10 min for impact modification in thermoplastic olefin compounds, footwear midsoles and wire and cable extrusion.
View grade →Add Masterbatch to Your Automotive & Engineering Resin
BASTONE manufactures these masterbatch grades in Hangzhou. Select a grade for the datasheet and dosage.
PA Organic Black Masterbatch
Polyamide-carrier black concentrate pigmented with aniline black, which dissolves in nylon and avoids pigment agglomeration, dosed at 0.5 to 2 percent for PA and PA alloys.
View grade →Custom Color Masterbatch
Custom colour masterbatch for ABS, AS, HIPS, PS, PP, PE and related resins, supplied as pellets rated for 220 to 280 °C processing.
View grade →Weather-Resistant Anti-Aging Color Masterbatch
Colour masterbatch with light stabilizers and antioxidants that retains over 90 percent of mechanical properties after 3,500 to 5,000 hours of accelerated aging, for outdoor components.
View grade →Automotive & Engineering FAQ
What is glass-filled nylon?
Glass-filled nylon is PA66 reinforced with glass fibre. PA66 GF25 contains 25 percent glass fibre and delivers 145 MPa tensile strength and a 249 °C heat distortion temperature.
Which PP suits automotive exterior and interior parts?
EP531N is a high-flow impact copolymer (20 to 25 g/10 min, Charpy above 40 kJ/m²) listed for automotive components. K9928H is a 28.8 g/10 min option for automotive modified compounds.
Can WANSUPER 65015 be used in PP compounds?
Yes. The product page lists impact modification in thermoplastic olefin compounds as a main use. Run a loading trial in your own base resin.
Need a grade that is not listed?
Send the resin or chemical you use today, the application and your monthly volume. BASTONE replies with matching grades, COA documents and a quote.