Stay updated with Bastone Petrochem's latest news and industry insights. Explore our expert blogs covering market trends, comprehensive applications of organic and inorganic chemicals, synthetic resins, and specialized additives. Discover product comparisons, supply chain solutions, and coverage of global events and exhibitions we attend.
CPP and BOPP are the same polymer taken down two different film lines: CPP is cast polypropylene film, quenched on a chill roll and never stretched, and BOPP is biaxially oriented polypropylene film, stretched in both directions after casting. That…
Polypropylene is a resin, and which comparison you are actually making depends on which sense of the word is in front of you. In the plastics trade, “resin” is the polymer as it is sold — PP, PE and PET…
A polypropylene product lasts anywhere from one filling to more than a hundred years, and where a given part sits in that range is set by its product class, its exposure and the failure criterion someone attached to it. How…
Two PP compounds at identical 20 wt% elastomer loading can land on opposite sides of a cold-impact specification. One fractures at 0 °C with zero ductile failure. The other absorbs 23 kJ/m² and stays ductile past 60% of its cross-section.…
A thin-wall, high-cavitation tool needs a high-flow polypropylene homopolymer. The published melt-flow band for that duty runs from 20 g/10 min at the loose end to 60-70 g/10 min for the thinnest packaging sections. A 55 g/10 min grade sits…
Two impact copolymer quotes sit on the desk. One reports notched Izod at 115.1 J/m, the other a Charpy floor of 40 kJ Dividing an energy by a length and dividing it by an area do not produce the same…
A single PE100 pipe compound prints three melt flow rates on one datasheet: 0.08, 0.3 and 8.5 g/10 min. Only the middle number, measured at 190 °C under a 5 kg load, is the one the application standard asks for.…
Two oils both certified inhibited under IEC 60296 can face acceptance limits four times apart on acidity and sixteen times apart on sludge. The 2020 edition splits oils by performance type before it splits them by inhibitor content, and a…
A woven sack tape line runs on a polypropylene homopolymer with a melt flow rate near 3 g/10 min (230 °C / 2.16 kg) and an isotactic index above 95%. That single sentence narrows thousands of commercial PP grades to…
A Hyosung pipe-grade datasheet states “PPR 125, MRS 12.5 MPa.” The grade number is ten times the minimum required strength at 20 C over 50 years (ISO 12162:2009). That makes it a hydrostatic strength class, not a temperature rating. A…