Factory and Activities
Specifications
General Information
| Property | Value |
|---|---|
| Product Name | Terluran® HI-10 |
| Polymer Type | Acrylonitrile Butadiene Styrene (ABS) |
| Manufacturer | INEOS Styrolution |
| Processing Method | Injection Molding, Extrusion |
| Appearance | Uncolored |
| Density (ISO 1183) | 1030 kg/m³ |
Technical Properties
| Property | Standard | Unit | Value |
|---|---|---|---|
| Melt Volume Rate (220 °C/10 kg) | ISO 1133 | cm³/10 min | 5.5 |
| Izod Notched Impact Strength (23 °C) | ISO 180/A | kJ/m² | 36 |
| Izod Notched Impact Strength (-30 °C) | ISO 180/A | kJ/m² | 14 |
| Charpy Notched Impact Strength (23 °C) | ISO 179/1eA | kJ/m² | 35 |
| Charpy Notched Impact Strength (-30 °C) | ISO 179/1eA | kJ/m² | 13 |
| Charpy Unnotched Impact Strength (-30 °C) | ISO 179/1eU | kJ/m² | 140 |
| Tensile Stress at Yield (23 °C) | ISO 527 | MPa | 38 |
| Tensile Strain at Yield (23 °C) | ISO 527 | % | 2.8 |
| Tensile Modulus | ISO 527 | MPa | 1900 |
| Nominal Strain at Break (23 °C) | ISO 527 | % | 9 |
| Flexural Strength (23 °C) | ISO 178 | MPa | 56 |
| Hardness, Ball Indentation | ISO 2039-1 | MPa | 74 |
| Vicat Softening Temperature VST/B/50 | ISO 306 | °C | 90 |
| Vicat Softening Temperature VST/A/50 | ISO 306 | °C | 103 |
| Heat Deflection Temperature A (1.8 MPa) | ISO 75 | °C | 93 |
| Heat Deflection Temperature B (0.45 MPa) | ISO 75 | °C | 97 |
| Coefficient of Linear Thermal Expansion | ISO 11359 | 10⁻⁶/°C | 80 - 110 |
| Thermal Conductivity | ISO 22007-4 | W/(m K) | 0.17 |
| Dissipation Factor (100 Hz) | IEC 62631-2-1 | 10⁻⁴ | 54 |
| Dissipation Factor (1 MHz) | IEC 62631-2-1 | 10⁻⁴ | 82 |
| Relative Permittivity (100 Hz) | IEC 62631-2-1 | - | 2.9 |
| Relative Permittivity (1 MHz) | IEC 62631-2-1 | - | 2.8 |
| Volume Resistivity | IEC 62631-3-1 | Ohm*m | >10¹³ |
| Surface Resistivity | IEC 62631-3-1 | Ohm | >10¹³ |
| Water Absorption (Saturated at 23 °C) | ISO 62 | % | 1.03 |
| Moisture Absorption (23 °C/50% RH) | ISO 62 | % | 0.21 |
| Yellowness Index | DIN 6167 | - | 15 |
Recommended Processing Conditions
| Parameter | Standard | Unit | Value |
|---|---|---|---|
| Linear Mold Shrinkage | ISO 294-4 | % | 0.4 - 0.7 |
| Melt Temperature Range | ISO 294 | °C | 220 - 260 |
| Mold Temperature Range | ISO 294 | °C | 30 - 80 |
| Injection Velocity | ISO 294 | mm/s | 200 |
| Drying Temperature | - | °C | 80 |
| Drying Time | - | h | 2 - 4 |
Applications
Appliance Housings
Manufacturers mold vacuum cleaner bodies, power tool casings, and kitchen appliance exteriors using Terluran® HI-10. The resin provides a Vicat softening temperature of 103°C (VST/A/50), preventing deformation near motors and heat-generating electrical components. High surface hardness (74 MPa ball indentation) resists scratching during daily consumer use.
Lawn & Garden Components
Outdoor equipment requires plastics that survive physical impacts in varying weather conditions. The material retains a Charpy notched impact strength of 13 kJ/m² at -30°C, preventing mower decks and trimmer housings from shattering during cold-weather storage or operation. Excellent rigidity keeps moving parts aligned under mechanical stress.
Polymer Compounding
Polymer formulators blend the resin with specific additives to create custom masterbatches. The medium flow rate (5.5 cm³/10 min MVR) allows uniform dispersion of colorants, UV stabilizers, and flame retardants during twin-screw extrusion. A low baseline yellowness index of 15 ensures accurate color matching for final molded products.
Why Source Through BASTONE
BASTONE Petrochem operates as a listed distributor for major Chinese petrochemical producers, including SINOPEC. We secure direct factory allocations rather than buying from spot-market resellers. Buyers receive consistent material grades, verifiable batch numbers, and full COA documentation traceable to the original production run.
Our parent company manufactures specialty chemicals across four production sites, giving our team deep technical insight into polymer processing. We help procurement managers evaluate material specifications against actual factory floor requirements. If Terluran® HI-10 faces global supply constraints, our engineers can identify exact equivalent high-impact ABS grades from PetroChina or CNOOC portfolios to keep your production lines running.
Export operations run through Zhejiang Bastone Technology Co., Ltd, our dedicated international trade platform. We manage the entire logistics chain from warehouse dispatch to vessel loading. Buyers can negotiate flexible trade terms, select optimal packaging formats, and rely on accurate customs documentation to prevent port delays.
Sourcing & Logistics
| Logistics Detail | Specification |
|---|---|
| Supply Origin | China / Global INEOS Network |
| Standard Packaging | 25 kg moisture-proof bags, 1000 kg jumbo bags |
| Export Entity | Zhejiang Bastone Technology Co., Ltd |
| Documentation Provided | TDS, SDS, COA, Commercial Invoice, Packing List, Bill of Lading |
| Supported Trade Terms | FOB, CIF, CFR, DAP |
| Sample Availability | Available upon request for factory qualification |